May 6 2018

Successful Carolingian bell-founding

Bastian Asmus


 Carolingian bell-founding on Campus Galli

A Carolingian bell for Campus Galli  has been cast successfully. Three experiments were necessary to cast a complete bell. On 28.4.2018, for the first time in hundreds of years, a Carolinigina bell was successfully cast according to the treatise of Theophilus Presbyter. The sound is already breathtaking – although the bell has not yet been worked on – and shows the harsh sound so typical of for these early bells. I am thrilled! The bell of Canino, the earliest known bronze cast church bell is the model for the bell that we cast in this experiment. It was not only reconstructed to the original dimensions, but more importantly, its original production method was also reconstructed, following the excellent medieval manuscriput of Theophilus Presbyter]. Thus the  bell-founding experiments on the Campus Galli have finally come to a happy  end. The bell can still be regarded as a raw casting on the Campus Galli  until Whitsun. Then, after I have finished it, it will be installed on campus.

Henkel der Bienenkorbglocke

Applied archaeometallurgy: The crown of the Carolingian bell of experiment no. 3 form 2018.

 

The bell

The shape of the beehive bell is based on the oldest known cast bronze bell: the Canino bell. It has a diameter of 39 cm at the sound ring and weighs 44 kg. Note the triangular sound-holes of this bell from the 8th/9th century. Theophilus also describes them in the 12th century in his bell-founding chapter. According to the unanimous opinion of the bell entrepreneurs, however, these do not contribute to the sound.

Canino bell drawing

Drawing of the bell of Canino in the original publication [zotpressInText item="{4ICDYHGU}"].

Carolingian bell casting in the Middle Ages can only be achieved in a team effort

Große Drehlade zum Formen von Glocken

Large lathe for bell-founding. Making the core . Unlike later, early bells were made horizontally, and in the lost-wax process!

Besides many technical details which will be discussed later on, the most important conclusion is that a large and well-coordinated team is necessary to successfully master the bell-founding process. This year we have succeeded in doing this in a particularly good way. This also allows some conclusions for the past, because good communication is necessary to successfully execute the entire process.

Previous experiments and some background on medieval bell-founding

Some time ago I started a larger project: the casting of a medieval bell. To that end  I spend some time at the  Campus Galli near Meßkirch, south western Germany. At the weekend of the 27./28. June 2015 a core of the bell was made. The casting of the medieval bell will take place from September 16 to 20. The Campus Galli is project that aims at building a Carolingian monastery with authentic methods only. The Campus Galli thus provided an excellent infrastructure to conduct this archaeometallurgical experiment. In the first part of this report we will talk a bit about the history of bells, where they are concerned with Christianity, in the second part I will discuss the manufacturing process and in the third part I will report on the experimental reconstruction  of the casting of a medieval bell.

A very incomplete introduction to early church bells

Oldest known church bell from Canino, Italy

The oldest surviving church bell is the bell from Canino, Upper Italy. It stems from the 8th/9th century and is now at the Vatican museums.

Cast bells are much older than Christianity and the earliest cast bronze bells are small clapper bells found around  pre-Shang China, roughly 1900-1600 BC , but this shall not be of further interest here. The oldest surviving cast bronze church bell is from the ninth century AD. It is the bell of Canino in Upper Italy , nowadays housed in the Vatican museum . From the fifth century bells were used by Christians.

The bells from the 8th to the 12th century did differ in several respects from bells we know nowadays. They possessed a different shape, reminiscent of old beehives. Because of the simpler shape and the sound. The sound of the bells was less defined than today. The following sound snippet is from the oldest resonant bell still in existence in Germany:

via wikimedia commons, User: 2micha

It is the sound of the Lullus bell from Bad Hersfeld, Hassia, cast in 1038 AD. The image to the left shows the differences in the bell shape. The early church bells were more or less of a uniform thickness throughout. In the beginning there was no sound ring of any note. This only evolved over time and the differences in thickness, which are responsible for the sound, became more pronounced in the following centuries. Another difference is the mode of production, whereas modern bells foundries use a two part mould, which is made using a clay model of the bell, until the 12th or 13th century AD bell founding relied on the lost wax method.

Bell shape of early Christian cast bronze bells and modern bells.

Shape of bells in the 9th century compared to modern times.

Experiences and observations made

My experience of the broken core can also be read indirectly in the schedula diversarum artium of the Benedictine Theophilus Presbyter for bell casting .

 

Theophilus Presbyter De fundendis camapanis

Detail from Theophilus Presbyter’s de diversis artibus, Harley MS 3915. We see Theophilus warning to dry each layer of core clay properly, before applying the next one.

Quo facto, sume ipsum lignum et circumpone ei argillam fortiter maceratam, inprimis duobus digitis spissam, qua diligenter siccata, suppone ei alteram, sicque facies donec forma compleatur quantam eam habere volueris, et cave ne unquam superponas argillam alteri nisi inferior omnino sicca fuerit.

Once that is done, take the wooden spindle and cover it with vigorously worked clay, first of two fingers thickness. Is this thoroughly dried, put the next about it, and repeat this until the mould is ready, as big as you want it. And make sure that you never apply a layer on the other before the underlying clay is completely dry.

His insistent warning is not followed by a consequence, but it can be assumed that similar mishaps happened to the craftsmen of that time: If you don’t follow the instructions – for example to keep to an ambitious schedule – what happened to me happens: The (too) damp clay core breaks out of each other. Why is that so?

The clay core is made in  horizontal fashion i.e. as long as the moulded clay is damp, it tends to tear off as it hangs freely. If the clay is too damp, it tears off due to its own weight. Perhaps this is also one of the reasons why from the 13th/14th century on one started to form bells standing. Here the moulded clay can also move when moist, but the clay core does not hang freely, and nothing can tear off. The worst that can happen is that the core collapses a little.

Bild eines gebrochenen Kernes für eine karolingische Bienenkorbglocke

 

Der Lehmkern der Bienenkorbglocke wird auf einer Holzspindel aufgebaut. Im Unterschied zu späteren Jahrhunderten, werden karolingische Glocken horizontal liegend geformt.

The clay core of the bell is mounted on a wooden spindle. Unlike later centuries, Carolingian bells are shaped horizontally.   Image: rk-film.de

See the following images for an illustration how the core is made

 

wooden spindle

Inserting the spindle in the large lathe.

Loam is applied in layers to an oaken wood spindle. Each layer should be well dried before applying another layer. Theophilus suggests layers about two fingers thickness. These layers can be dried relatively easily with a small fire under the revolving spindle, however wind works even better. Since the core is mounted horizontally, the weight of the core acts on the freely suspended part of the core. The problem is the total moisture content of the core, because a moist core tends to tear apart. If the core becomes too heavy, it tears apart in the middle.

Bell-founding: Schematic of the bell's core

Schematic of the bell core: 1. wooden spindle     2. first loam layer        3. second loam layer      4. competed core      5. wax model of the bells body.

The addition of straw and horse manure – sometimes referred to as organic tempering counteracts this by producing a fibre composite. The organic fibres in the moulded clay increase its tensile strength. De facto this means that the thus treated, very lean moulding loam has improved plastic properties in the moist state. This results in a sufficient stability not to tear apart. In addition, the organic admixture increase moisture transport and reduces drying times. Moreover, during firing of the mould these fibres burn and ensure improved gas permeability of the moulding material.

Carolingian bell-founding: Almost finished with the core for the bell.

Second last layer of core loam.  Photo: © Simone Napierala 2015.

The last layer of the mould core consists of fine moulding loam, so that the surface of the casting becomes smoother. It has no addition of straw, only the fibres of the horse manure.

 

Nevertheless, some challenges remain

Although the bell is complete, the properties of the moulded clay to be examined have also led to undesirable effects. On the one hand, only a poorer casting surface quality was achieved this time, and on the other hand, the mould broke for the first time. By damming and prudent action during casting, the bell could be saved, even though the mould  broke below the handle. Nevertheless, this has had a negative influence on the handle, which is clearly visible at the top of the picture.

Future work

The next bell I will cast this way is the Hachen bell. Today it can be seen in the Glockenmayr Museum in Innsbruck, Austria. I am allowed to measure due to the courtesy of Johannes Grassmayr in the museum there. In this experiment the focus is on the refinement of proven  moulding loams.

References

 


Jun 8 2015

Aristotle and Phyllis Aquamanile

Bastian Asmus
Aristoteles und Phyllis, Aristotle and Phyllis, Lai d'aristote

Aristotle and Phyllis aquamanile, 2015 by Bastian Asmus made after a 15th century original from the low countries.

Aristoteles und Phyllis Maltererteppich

Aristotle and Phyllis in the  Malterer tapestry. Now in the Augustinermuseum Freiburg. Source: Wikimedia Commons.

The Middle High German lay of Aristotle and Phyllis probably originated in the 13th century in the upper Rhine region between Basel and Strasbourg. The story was a popular motif and is found not only in sculptural works, but also in tapestries and drawings. King Philip of Macedonia’s  son Alexander, later called the Great, is educated by Aristotle. The young Alexander, madly in love with the beautiful Phyllis, is scolded by his teacher for his mental absence and warned of the dangers of love and/or women. Aristotle effects the separation of the lovers through intervention with the King. Musing on revenge beautiful Phyllis seduced Aristotle.  As price for her love she demanded that she could ride around in the gardens on his back. Whilst doing so Aristotle is discovered by the Queen and Aristotle falls prey to shame and disgrace, because he could not meet his own requirements. He was exiled and pondered over the wickedness of the world.

aristoteles und Phyllism Hausbuchmeister

Aristotle and Phyllis. Hausbuchmeister 15th century. Source: Wikimedia Commons.

The Aristotle and Phyllis aquamanile was modelled in wax and cast in  the lost wax technique. It can now be seen in the newly founded European Hanseatic league Museum.


May 23 2015

Aquamanile in the form of a knight on horseback

Bastian Asmus
Knight Aquamanile

This aquamanile in the form of a knight on horseback was cast in 2015 in Bastian Asmus’ workshop, and leans heavily on an original from the 13th century. It was cast in bronze by the lost wax technique.

Next to lion and griffin aquamanile a knight on horseback was a widely used form of aquamaniles . One of these  I made earlier this year and cast it in bronze in my workshop.  The original aquamanile is from the 13th century from northern Germany, probably around Hildesheim.

This object displays the impressive skills of the 13th century artists and foundrymen. The arms, legs and stir-ups are modelled full round, which adds quite a bit of complexity to the preparation of the casting mould; especially when we are considering that these moulds were not made like modern investment moulds, but by applying moulding loam to every bit of wax surface.  The materials thickness of the bridle or stir-ups is in places less than 2mm in diameter. The knight is not modelled separately but cast in one piece with the horse.

Just as the griffin aquamanile this reconstruction can be seen in the newly opened European Hanseatic League Museum in Lübeck, Germany.

 Literature