May 6 2018

Successful Carolingian bell-founding

Bastian Asmus


 Carolingian bell-founding on Campus Galli

A Carolingian bell for Campus Galli  has been cast successfully. Three experiments were necessary to cast a complete bell. On 28.4.2018, for the first time in hundreds of years, a Carolinigina bell was successfully cast according to the treatise of Theophilus Presbyter. The sound is already breathtaking – although the bell has not yet been worked on – and shows the harsh sound so typical of for these early bells. I am thrilled! The bell of Canino, the earliest known bronze cast church bell is the model for the bell that we cast in this experiment. It was not only reconstructed to the original dimensions, but more importantly, its original production method was also reconstructed, following the excellent medieval manuscriput of Theophilus Presbyter]. Thus the  bell-founding experiments on the Campus Galli have finally come to a happy  end. The bell can still be regarded as a raw casting on the Campus Galli  until Whitsun. Then, after I have finished it, it will be installed on campus.

Henkel der Bienenkorbglocke

Applied archaeometallurgy: The crown of the Carolingian bell of experiment no. 3 form 2018.

 

The bell

The shape of the beehive bell is based on the oldest known cast bronze bell: the Canino bell. It has a diameter of 39 cm at the sound ring and weighs 44 kg. Note the triangular sound-holes of this bell from the 8th/9th century. Theophilus also describes them in the 12th century in his bell-founding chapter. According to the unanimous opinion of the bell entrepreneurs, however, these do not contribute to the sound.

Canino bell drawing

Drawing of the bell of Canino in the original publication [zotpressInText item="{4ICDYHGU}"].

Carolingian bell casting in the Middle Ages can only be achieved in a team effort

Große Drehlade zum Formen von Glocken

Large lathe for bell-founding. Making the core . Unlike later, early bells were made horizontally, and in the lost-wax process!

Besides many technical details which will be discussed later on, the most important conclusion is that a large and well-coordinated team is necessary to successfully master the bell-founding process. This year we have succeeded in doing this in a particularly good way. This also allows some conclusions for the past, because good communication is necessary to successfully execute the entire process.

Previous experiments and some background on medieval bell-founding

Some time ago I started a larger project: the casting of a medieval bell. To that end  I spend some time at the  Campus Galli near Meßkirch, south western Germany. At the weekend of the 27./28. June 2015 a core of the bell was made. The casting of the medieval bell will take place from September 16 to 20. The Campus Galli is project that aims at building a Carolingian monastery with authentic methods only. The Campus Galli thus provided an excellent infrastructure to conduct this archaeometallurgical experiment. In the first part of this report we will talk a bit about the history of bells, where they are concerned with Christianity, in the second part I will discuss the manufacturing process and in the third part I will report on the experimental reconstruction  of the casting of a medieval bell.

A very incomplete introduction to early church bells

Oldest known church bell from Canino, Italy

The oldest surviving church bell is the bell from Canino, Upper Italy. It stems from the 8th/9th century and is now at the Vatican museums.

Cast bells are much older than Christianity and the earliest cast bronze bells are small clapper bells found around  pre-Shang China, roughly 1900-1600 BC , but this shall not be of further interest here. The oldest surviving cast bronze church bell is from the ninth century AD. It is the bell of Canino in Upper Italy , nowadays housed in the Vatican museum . From the fifth century bells were used by Christians.

The bells from the 8th to the 12th century did differ in several respects from bells we know nowadays. They possessed a different shape, reminiscent of old beehives. Because of the simpler shape and the sound. The sound of the bells was less defined than today. The following sound snippet is from the oldest resonant bell still in existence in Germany:

via wikimedia commons, User: 2micha

It is the sound of the Lullus bell from Bad Hersfeld, Hassia, cast in 1038 AD. The image to the left shows the differences in the bell shape. The early church bells were more or less of a uniform thickness throughout. In the beginning there was no sound ring of any note. This only evolved over time and the differences in thickness, which are responsible for the sound, became more pronounced in the following centuries. Another difference is the mode of production, whereas modern bells foundries use a two part mould, which is made using a clay model of the bell, until the 12th or 13th century AD bell founding relied on the lost wax method.

Bell shape of early Christian cast bronze bells and modern bells.

Shape of bells in the 9th century compared to modern times.

Experiences and observations made

My experience of the broken core can also be read indirectly in the schedula diversarum artium of the Benedictine Theophilus Presbyter for bell casting .

 

Theophilus Presbyter De fundendis camapanis

Detail from Theophilus Presbyter’s de diversis artibus, Harley MS 3915. We see Theophilus warning to dry each layer of core clay properly, before applying the next one.

Quo facto, sume ipsum lignum et circumpone ei argillam fortiter maceratam, inprimis duobus digitis spissam, qua diligenter siccata, suppone ei alteram, sicque facies donec forma compleatur quantam eam habere volueris, et cave ne unquam superponas argillam alteri nisi inferior omnino sicca fuerit.

Once that is done, take the wooden spindle and cover it with vigorously worked clay, first of two fingers thickness. Is this thoroughly dried, put the next about it, and repeat this until the mould is ready, as big as you want it. And make sure that you never apply a layer on the other before the underlying clay is completely dry.

His insistent warning is not followed by a consequence, but it can be assumed that similar mishaps happened to the craftsmen of that time: If you don’t follow the instructions – for example to keep to an ambitious schedule – what happened to me happens: The (too) damp clay core breaks out of each other. Why is that so?

The clay core is made in  horizontal fashion i.e. as long as the moulded clay is damp, it tends to tear off as it hangs freely. If the clay is too damp, it tears off due to its own weight. Perhaps this is also one of the reasons why from the 13th/14th century on one started to form bells standing. Here the moulded clay can also move when moist, but the clay core does not hang freely, and nothing can tear off. The worst that can happen is that the core collapses a little.

Bild eines gebrochenen Kernes für eine karolingische Bienenkorbglocke

 

Der Lehmkern der Bienenkorbglocke wird auf einer Holzspindel aufgebaut. Im Unterschied zu späteren Jahrhunderten, werden karolingische Glocken horizontal liegend geformt.

The clay core of the bell is mounted on a wooden spindle. Unlike later centuries, Carolingian bells are shaped horizontally.   Image: rk-film.de

See the following images for an illustration how the core is made

 

wooden spindle

Inserting the spindle in the large lathe.

Loam is applied in layers to an oaken wood spindle. Each layer should be well dried before applying another layer. Theophilus suggests layers about two fingers thickness. These layers can be dried relatively easily with a small fire under the revolving spindle, however wind works even better. Since the core is mounted horizontally, the weight of the core acts on the freely suspended part of the core. The problem is the total moisture content of the core, because a moist core tends to tear apart. If the core becomes too heavy, it tears apart in the middle.

Bell-founding: Schematic of the bell's core

Schematic of the bell core: 1. wooden spindle     2. first loam layer        3. second loam layer      4. competed core      5. wax model of the bells body.

The addition of straw and horse manure – sometimes referred to as organic tempering counteracts this by producing a fibre composite. The organic fibres in the moulded clay increase its tensile strength. De facto this means that the thus treated, very lean moulding loam has improved plastic properties in the moist state. This results in a sufficient stability not to tear apart. In addition, the organic admixture increase moisture transport and reduces drying times. Moreover, during firing of the mould these fibres burn and ensure improved gas permeability of the moulding material.

Carolingian bell-founding: Almost finished with the core for the bell.

Second last layer of core loam.  Photo: © Simone Napierala 2015.

The last layer of the mould core consists of fine moulding loam, so that the surface of the casting becomes smoother. It has no addition of straw, only the fibres of the horse manure.

 

Nevertheless, some challenges remain

Although the bell is complete, the properties of the moulded clay to be examined have also led to undesirable effects. On the one hand, only a poorer casting surface quality was achieved this time, and on the other hand, the mould broke for the first time. By damming and prudent action during casting, the bell could be saved, even though the mould  broke below the handle. Nevertheless, this has had a negative influence on the handle, which is clearly visible at the top of the picture.

Future work

The next bell I will cast this way is the Hachen bell. Today it can be seen in the Glockenmayr Museum in Innsbruck, Austria. I am allowed to measure due to the courtesy of Johannes Grassmayr in the museum there. In this experiment the focus is on the refinement of proven  moulding loams.

References

Tong, K.-W. (1983) ‘Shang musical instruments (Teil 2)’, Asian Music, 15, pp. 103–184. Cite
Asmus, B. (2016) ‘Theophilus und der Guss einer Bienenkorbglocke. Ein Experiment’, Der Anschnitt, 68(1–2), pp. 45–60. Cite
Bayley, J. and Richards, J.D. (1993) ‘Medieval Founding’, in The Bedern Foundry. York: Council for Brtish Archaeology (The Archaeology of York), pp. 186--200. Cite
Kramer, K. (1986) ‘Geschichte der Glockenzier. Anregung zur Gestaltung neuer Glocken’, in Glocken in Geschichte und Gegenwart, Bd.1. Karlsruhe: Badenia, pp. 49--72. Cite
Meineke, E. et al. (1998) ‘Glocke : Germanische Altertumskunde Online’, Reallexikon der Germanischen Altertumskunde. Berlin, New York. Available at: http://www.degruyter.com/view/GAO/RGA_1976 (Accessed: 18 July 2015). Cite
Brepohl, E. (1999) Theophilus Presbyter und das mittelalterliche Kunsthandwerk. Band 2 Goldschmiedekunst. Böhlau. Cite

 


Jan 20 2018

Handgonne breech loader, cast bronze Part I

Bastian Asmus

In this series of articles I will find out how to make a particular handgonne, and in extension, very early firearms in general; or rather how they could have been manufactured with the contemporary technology. I am not much for guns’n shooting, but I have always been intrigued by the casting process of guns and cannon.
Why? Because, as a fully trained bronze founder I know that there are a lot of challenges involved and even a lot of room for failure. As a professional maker of things, failures are among the least favourite topics to talk about. However, also being a scientist helps to overcome this predicament: Without failure there can be no progress. Or in other words we should not content ourselves with our hypotheses, but should constantly try to falsify them.

 

Early breech loaded handgonne.

This image of a supposedly 15th century handgonne shows a very early breech loading system, that did not take hold for centuries to come. Technical limitations in the manufacturing process, may well be responsible for this. It could simply not be manufactured as easily as the much more common muzzle loaders. Source: Viking Swords Forum thread 7364.

Continue reading


Nov 23 2017

Handgonnes: A health and safety issue?

Bastian Asmus

Detail from the Bellifortis manuscript by Conradius Kyeser (ca. 1430).  Source: Bayersiche Staatsbibliothek. License:  CC BY-NC-SA 4.0

Handgonnes: A health and safety issue?

Surprisingly health and safety issues are not as new as many might suspect. At least for German speaking people they actually originate at least in medieval times. Of all things this health and safety rule is from the earliest published technical treatise in German language and deals with: Guns and how to use them. Interestingly enough there is a section that underscores the danger of these things.  In my recent research on early breech loaded bronze guns and my experiments on how to make them one of the original questions is how safe are they to use. Apparently not as safe as one might hope for. 

The Feuerwerkbuch, Freiburger manuscript Ms 362

Just how safe to use were they? Chapter 223 in the Feuerwerkbuch underscores the general modern perception that these where as dangerous to the wielder as to the enemy. The earliest version of the Feuerwerkbuch was transscribed to high German by Ferdinand Nibler .  The complete work is available online. This very early technical treatise authored in German provides invaluable insights for the understanding of the matter of early firearm usage. And the following health and safety instruction caught my eye. It is only present in two of the surviving copies. In the Freiburger Manuscript (Freiburg Ms 362 from 1432)  it reads:

In transliterated form chapter 223 as follows (Nibler 2005, 85):

Das man kainer büchß si sye groß oder si sye klain trwen sol sunnder sich daruor hüten als denne dise nächgeschribne lere dich wyset.
Aber ain lere dem der vß der büchß schiessen will er sol kainer büchß nit viel trwen si sye klain oder groß si sye Ibel oder wol geladen wie die büchß ist so hüt dich nütz dester minnder dauor ouch lçg wenn si du ladest das kain ysen das annder rüre wann das puluer möchte dauon ennzündet werden.

Transcription to high German (Nibler 2005, 40):

Dass man keiner Büchse, sie sei groß oder sie sei klein, trauen soll sondern sich vor ihr hüten, wie diese nachgeschriebene Anweisung weist.
Aber eine Belehrung für den, der aus der Büchse schießen will: Er soll einer Büchse auf keinen Fall vertrauen, sie sei klein oder groß, sie sei schlecht oder gut geladen. Wie die Büchse auch ist – hüte Dich nichtsdestoweniger davor! Sieh‘ auch zu, dass wenn Du sie ladest kein Eisen ein anderes Eisen berühre, denn das Pulver könnte davon entzündet werden!
Translation to English
That you should not trust any gonne be it small or large, but beware of it as the following instructions advise.

But a lesson to whom wants to shoot from a gonne. He shall not trust the gonne under any circumstances, be it small or large, be it badly or well loaded. In whatever state the gonne is, beware of it nonetheless. Make sure when you you load it that no iron touches another iron, as the powder may be ignited upon this.

3d reconstruction of an early breech loaded handgonne.

3d reconstruction of an early breech loaded handgonne.

 

Bellifortis, BSB Hss Clm 30150

The second copy of the Feuerwerkbuch is preserved in the Bellifortis by Korad Kyeser . I included it here, as it is one of the few chapters that deviates from the above mentioned original.

Transliteration by the author

Das ma je kainer büchs tzündn ssol wie sy ist Aber ain lere dem der uß der büchsn schießßn wil Er sol si kainer büchs nicht zu getruwe si sye klain oder groß sy sy beschossn oder nit sy si übel oder wolgeladn wie die buchs iist so hut dich nichtzt deß mind dauor Ouch lüg wen Du sy ladest das kain ysen das ander rür wan das puluer möcht villicht dauo entzund werdn.

Transcription to high German

Daß man bloß keine Büchse zünden soll wie sie ist Aber eine Lehre dem der aus der Büchse schießen will. Er soll keiner Büchse trauen, sei sie klein oder groß. Sei sie beschossen oder nicht, sei sie schlecht oder gut geladen. Wie die Büchse ist, so hüte dich nichtsdestoweniger davor. Auch sieh zu, wenn Du sie lädst, dass kein Eisen ein anderes (Eisen) , denn das Pluver möchte vielleicht davon entzündet werden.

Translation

That you should not ignite a gonne as it is. But a lesson to whom wants to shoot  from a gonne. He shall not trust a gonne, be it small or large. Be it that the gonne was fired or not, be it that it is badly or well charged. Whatever the state of the gonne, beware of the gonne nonetheless. Also make sure, when loading it, that no iron touches another (iron), as the powder might possibly ignited upon this this

Interestingly this warning is not in the printed version of the Feuerwerkbuch from 1529. As to whether this is due to higher manufacturing standards, that led to safer gonnes, or to totally different circumstances must for the moment remain open.

References

Kyeser, C. (1430). Bellifortis - BSB-Hss  Clm 30150. http://daten.digitale-sammlungen.de/~db/0009/bsb00090291/images/
Nibler, F. (2005). Das Feurwerkbuch in synoptischer Darstellung zweier anonymer Originaltexte. Transkription und Textvergleich des  Freiburger Manuskriptes Ms 362 von 1432  und des so genannten    Feuerwerkbuches von 1420  (gedruckt 1529 bei Stainer, Augsburg)  mit erklärenden Anmerkungen zu den Texten. http://www.feuerwerkbuch.homepage.t-online.de/